Skip to content

The Laser

Placing and Framing

Choose where the job starts, frame its outline on the workpiece, jog the head from the panel or the keyboard and save favorite positions.

  • Start from: absolute coordinates (the design is engraved where it is on the bed), current head position, or user origin. Except in absolute coordinates, the job origin (3 × 3 grid) says which point of the design goes under the head.
  • Selection Only (preview banner, Laser tab of Bernie Studio): only the selected objects are sent; with “origin on the selection”, the job origin is computed from them, otherwise from the whole drawing (the selection keeps its place, to re-engrave part of a job). The state of these two options when a project opens is set in the preferences, which can also save them with the project.
  • Frame: the head traces the job outline, laser off (or on at low power if manual fire is allowed); “Job Outline” follows the hull instead of the rectangle; “Loop” repeats until Stop. A job that goes outside the work area is neither framed (the head would hit its end stops) nor sent.
  • Controls: home, unlock, arrow jogging (press and hold: up to the edge), go to coordinates or to the selection, 0,0 here (machines without limit switches), job end position. The jog step and speed are kept between sessions. From Machine Zero: the arrows bring the head to the chosen distance from machine zero on their axis (G53) instead of moving it by that distance. Numeric keypad (canvas active, laser connected): 8 2 4 6 and the diagonals 7 9 1 3 move the head by one step.
  • From the keyboard: ⌥⌘ ← → ↑ ↓ move the head by one step (Laser menu › Move Head). Right-click › Move Head Here sends it to the clicked point of the bed, laser off (also in Bernie Studio, laser connected).
  • Positions: save the current head position under a name (corner of a jig, bed centre…), then go back to it in one click; they are kept in the device profile.

This manual is also built into Bernie: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us

Try it in Bernie, for free.

Free laser engraving and cutting software for diode, CO2, fiber and galvo lasers. Windows, Mac, Linux, iPad, iPhone and in the browser.