Skip to content

Bernie User Guide

Files

Every format Bernie opens and writes, Ruida controllers over the network, templates, project notes and 1:1 printing.

  • Bernie projects (.bernie): design, layers, output settings and embedded images; the project remembers the device it was saved for and offers to switch back to it when opened.
  • Import: SVG, DXF, PDF, Illustrator (.ai), EPS (.eps, .ps: paths and colors; convert texts to paths before exporting, images are not imported), LightBurn (.lbrn2, .lbrn), xTool Creative Space (.xcs) and EZCad2 (.ezd, galvo lasers) projects, Ruida machine files (.rd), HPGL plots (.plt, .hpgl: one pen = one layer), G-code (laser-on moves become paths), images (PNG, JPEG, BMP, GIF, WebP, TIFF), 3D models (STL, OBJ, 3MF, PLY, OFF, AMF: depth map, see 3D models), at the size given by the resolution stored in the file (96 DPI if it has none). Texts in SVG and DXF files (TEXT, MTEXT) stay editable texts: font, size, bold, italic, alignment, lines and color are kept.
  • LightBurn projects: shapes, groups, texts (editable; if the font is missing, imported as paths with their original look), layers and their settings (mode, speed, powers, passes, interval, tabs, sub-layers…) and, in an empty project, layer order, optimization and notes. Positions are measured from the bottom-left corner of the bed, as in LightBurn; a project made for a larger bed says so.
  • xTool projects (.xcs): rectangles, ellipses, paths, texts and images of the first canvas, groups, one layer per xTool layer color; xTool’s engraving settings (specific to its machines) are not imported: set the layers’ speed and power.
  • EZCad2 projects (.ezd, the software shipped with most fiber galvo lasers): curves, rectangles, circles, ellipses, polygons, groups and copy arrays, hatches (turned into fill layers with their interval, angle and cross-hatch; outlines marked if the hatch marks them), images; the letters of a text come through the outlines EZCad saved. Each pen used becomes a layer: speed, power, passes, frequency, pulse width (MOPA), wobble, jumps and delays (laser on, laser off, end of path, corners) — a pen left as “Default” is named “Pen N”. The center of the EZCad field is placed at the center of the work area: choose the galvo device with the right field size first. EZCad commands (wait, inputs/outputs, axis) and hidden objects are not imported; EZCad3 projects (.ez3) not yet. File › Export for EZCad (.ezd, Experimental)… (Bernie Studio: File › Export › EZCad) writes the document (or the selection) the other way, to mark with EZCad until Bernie drives galvo boards: each layer becomes a pen (speed, power, passes, frequency, pulse width, wobble, jumps and delays — those of the galvo device when the layer has none), each shape a curve, fill layers hatches (interval, angle, cross-hatch, bidirectional or one way — the angle is converted: EZCad measures it with Y up, so 33° in Bernie reads 327° there, same lines), offset fills their concentric outlines as curves, each active sub-layer one more pen (“Name (2)”…), all in engraving order, Bernie’s groups as EZCad groups (within each layer), each image a grayscale image (adjustments, rotation, mask and negative applied, at the layer’s line interval) whose dithering is set in EZCad (image parameters); the center of the work area becomes EZCad’s origin. Texts go out as outlines. Experimental: files opened in EZCad 2.14.11 (shapes, hatches, image, sub-layers, groups and pen settings checked on 12/10), not yet marked on a machine — check them in EZCad before marking.
  • Ruida machine files (.rd, saved by RDWorks or LightBurn for the Ruida controllers of CO2 lasers): cut paths and layers, each on the layer of the closest color with its speed and power. A .rd file is already “compiled” for the machine: curves, fills and images are segments or scan lines in it, imported as they are, as lines. File › Export for Ruida (.rd)… (Bernie Studio: File › Export › Ruida) writes the job the other way: a file to copy to a USB stick for the machine’s screen, each layer with its color, speed and powers, coordinates counted from the job origin (the point of the job placed under the head, top left by default). Variable power (grayscale images, reduced-power tabs), pierce dwells and per-layer Z height are not carried over: Bernie says so. Laser panel of a Ruida device (found by “Find My Laser”, on the network or over USB, or chosen under “Your machine” for a CO2 laser): at the top, Start… (the controller starts the job as soon as it has been sent) and Send to Controller… (the job goes with a name — letters, digits, space, -, _, ., 24 characters at most — and the controller keeps it in its memory, to start from its screen; Number automatically advances the final number after each successful send, Bernie-001, Bernie-002…; depending on the model, the controller may also start it right away: same precautions), each after its confirmation and the checklist. Then the tools: Frame (the head goes around the job, laser off, starting from the job origin and coming back to it), Trace the frame (if the device allows it: the same tour with the laser on at low power; a CO2 tube’s beam is invisible, so it lightly marks the surface — paper, masking tape —, useful when the red pointer is missing), Move (arrows to hold: the head moves as with the machine’s keys and stops as soon as you let go; Z: the bed; over the network only, released automatically after 15 s), Information (board ID and version, power-on and work time, jobs done, documents in memory — read only), Test (reads the board ID: nothing moves or turns on) and Stop (stop order to the controller, after stopping a send in progress — the machine’s emergency stop button remains the safest). Job placement: the job origin (3 × 3 grid) says where the head is relative to the job; at bottom left, the job “rises” above the head: put the head on the workpiece’s bottom left corner, frame, start. Gweike Cloud: Material Thickness — the head goes down 17 mm minus the thickness before the job (Z-axis focus, at the start of each layer), then back up at the end; without a thickness, the Z axis does not move (experimental). Connection (folded once set): Network (IP address shown on the machine’s screen, port 50200) or USB (the controller’s port, cable in its “PC” socket, not the USB stick one; Mac, Windows, Linux); Virtual machine (try without a laser): everything goes to an imaginary machine that says what it received. LightBurn or RDWorks, when open, may hold ports 40200 and 40207 on the computer, where the controller answers: close them first. Device settings › Ruida controller: controller model (most of them, or the 634XG); Traced frame (laser on), its power (1 to 30 %) and speed; RF tube (tick it for an RF CO2 tube; otherwise a 0 % minimum power is reported — it is the controller’s corner power, and a glass tube fires poorly below its threshold); Dual-tube machine (in the layer settings, the choice of tubes and tube 2’s own powers, which the .rd file carries and the import reads back), a name for each tube, One tube at a time (each layer fires one or the other) and, for a two-head machine, the second head offset (X and Y, in mm: tube 2-only layers are shifted by that much to land on tube 1’s — measure the gap between the two heads’ engravings, negative if head 2 is farther from the machine origin; a layer on both tubes engraves two copies at once, without offset); name of the files kept in memory. Laser › Send to Ruida Controller (Network)… (Mac: Send to Ruida Controller…; iPad: “More” menu › Export; desktop app: File › Export › Ruida over the network…) opens the same panel for another device, with the machine settings.
  • Templates: File › Save as Template… keeps the project as it is (shapes, layers, settings); New From Template opens an untitled copy (the template is never modified); the last ones opened are listed first (“Recent”). In Bernie Studio, Templates… button: new project from a template or from a file, and saving the current project as a template (templates kept in the browser).
  • Project notes (File › Project Notes…): instructions, material, settings tried — saved with the project.
  • Export: SVG, DXF, PDF (vector, 1:1 scale, one color per layer), for Illustrator (PDF-compatible .ai: paths remain editable), G-code, Ruida machine file (.rd, above); Trace Images… traces several image files (default settings) and writes one SVG per image in the chosen folder (Bernie Studio: File › Trace images…, the SVGs are downloaded — in a zip archive when there are several); Export Original Image… saves the file of a project image.
  • Print… (⌘P): the design (or the selection) at 1:1 scale, in black; Print in Color… keeps the layer colors. Fill layers print filled — handy for a paper template. Printed line width (Settings, 0.15 mm by default, to the thousandth): for a cutter driven by a printer driver, which recognizes a cut by the exact line width. In Bernie Studio: Print… button (in layer colours or black, selection only, line width), then the browser’s printing.
  • The clipboard is shared with other applications (shapes, images); text copied elsewhere becomes a Text object at the center of the view.
  • Drag and drop onto the canvas: files to import, content dragged from another application (SVG, PDF, image, text); a .bernie project opens in its window, a .bernielot settings bundle offers its import.
  • File › New Project from File…: opens an image, an SVG, a DXF, a PDF, a LightBurn project… in a new project (the original file is not modified).
  • When a project opens, Bernie reports fonts missing on the computer: the texts keep their saved outline; Tools › Replace Missing Fonts… makes them editable again.

Useful external tools

Box and joint generators (Boxes.py, MakerCase…), foldable templates (Templatemaker…), gears, puzzles or mazes, single-line fonts (SHX, “single line” fonts) and vector image banks: export as SVG, DXF or PDF, then import into Bernie (fold lines in another colour land on their own layer).

In this section

  • Example Projects

    81 plywood projects ready to engrave and cut, set for your laser: ornaments, coasters, keychains, name plates and place cards with your own text.

  • Layered Panel

    Turn a picture into a plywood panel of stacked layers: one tone per layer, a frame, cutting rules, loose pieces and a gluing order marked on each piece.

  • Pages

    Several pages in one project, each with its own objects; layers and settings are shared, and the job engraves the page shown.

  • Web Tools

    Online generators — Boxes.py, MakerCase, Templatemaker or your own — opened in Bernie, the downloaded file going straight into the project.

  • Extensions

    Commands added to the Extensions menu: generators that create shapes from parameters, such as a gear, and filters that transform the selection, each run in isolation.

This manual is also built into Bernie: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us

Try it in Bernie, for free.

Free laser engraving and cutting software for diode, CO2, fiber and galvo lasers. Windows, Mac, Linux, iPad, iPhone and in the browser.