The Laser
Hour Counter and Maintenance
Work and firing hours, jobs and distance engraved for each laser, with maintenance reminders: lens, rails and belts, a CO2’s mirrors and cooling water.
Laser › Hour Counter and Maintenance… (also at the bottom of the Laser panel; in Bernie Studio: Laser panel › Tests and settings): for the active device, the work hours (jobs running), the firing hours (laser on), the number of jobs (stopped ones included) and the distance engraved, since commissioning or the last reset.
- Counting: each job sent to the laser is counted when it ends — its actual duration, and its estimated firing time scaled to that duration (a machine slower than planned fires longer); a stopped job counts the part done. Virtual laser jobs do not count. Galvo and K40 boards connected over USB count their jobs the same way.
- Maintenance reminders: each has an interval in firing or work hours — by default, clean the lens every 20 h of firing, clean the rails and check belts and wheels every 50 h of work; for a CO2, clean the mirrors (20 h of firing) and change the cooling water (100 h of work); for a galvo, the lens every 100 h of firing. Edit Reminders… changes, adds or removes them.
- Maintenance due: when an interval is reached, an orange banner says so at the top of the Laser panel; Done records the maintenance (the date is kept) and the reminder restarts from zero.
- Reset… (new machine, tube replaced): the counters restart from zero, the reminders stay.
- The counter follows the device: a renamed device keeps its own. A laser shared by Bernie Link keeps its own counter, the machine’s, whichever device sends the jobs; when connected to it, the panel and the window show its counter, and Done is recorded there. In Bernie Studio, the counter is kept in the browser.
This manual is also built into Bernie: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us
Try it in Bernie, for free.
Free laser engraving and cutting software for diode, CO2, fiber and galvo lasers. Windows, Mac, Linux, iPad, iPhone and in the browser.