Skip to content

Getting Started

Bernie tour

At first launch, a two-minute animated tour finds your laser, sets up the machine and its material library, then offers a first project.

At first launch, as long as no device is set up, Bernie opens on an animated tour: a welcome screen, then five steps, about two minutes.

Bernie's start-up tour: “Welcome to Bernie”, before it finds your laser.
Bernie’s welcome tour: “Welcome to Bernie”, before finding your laser.
  1. Three steps: draw, set up (each color is a layer), engrave.
  2. Your laser: diode, CO2, fiber / galvo, cutter / plotter (see Cutters and Plotters: the search is skipped), or no laser yet (the virtual laser, to try everything).
  3. Find the laser: Bernie queries the USB ports (without any movement) and looks for lasers announced on the network; if yours doesn’t show up, Choose from the catalog (commercial machines, by brand), Custom Machine (a machine that is not in the catalog, set up in the next step) or Import a profile (Bernie, .lbdev).
  4. Your machine: Controller for a catalog or custom machine (GRBL, including FluidNC and DLC32 boards, Marlin, Smoothieware, or the stock M2 Nano board on a CO2 laser; in Bernie Studio, GRBL or the M2 Nano board, on a CO2 laser), work area, origin (zero corner), homing at startup, and the linked material library — the machine’s own when the catalog has one, otherwise a starter library for the laser type. The profile is saved at the end of this step (it replaces the sample starter profile).
  5. All set: Engrave a material test (the test window opens, nothing runs without you), Open a sample project (the Bernie logo: a coaster for a diode, an acrylic key ring for a CO2, a metal tag for a fiber — settings are a starting point) or Start from a blank page.

Skip (or Esc) closes the tour at any time; nothing is saved before the end of “Your machine”. The tour never moves the head and never fires the laser. To see it again: Settings › General › Show the Bernie tour again, or Help › Bernie Tour…; with no device set up, the Laser panel also offers Add a Laser…. With “Reduce motion”, each scene is shown directly.

On iPad, the tour fills the screen (the scene above the text in portrait) and the search goes over the network: Wi-Fi lasers, Bernie Link and Macs in Hub mode (their pairing code is required and is entered here); open it again from Preferences. On iPhone, a short version — Welcome, Find the laser, All set — saves the laser to use from the workshop.

In Bernie Studio and the desktop app (Windows, Linux), the tour opens at first load when no device is set up in this browser or app; open it again from Help › Bernie tour…, from the button in the manual window or with Add your laser… in the Laser panel. The desktop app looks for the laser over USB and the network; in a browser, you choose your machine from the catalog (the USB link, in Chrome or Edge, is then made from the Laser panel). The machine’s material library is then offered first in Material library.

Add a Laser… starts the assistant on the laser steps only (type, search, catalog, work area and origin), with no welcome or first project; the laser joins your devices and becomes the active one. It is in the Laser menu, the Help menu and the Laser panel when no laser is connected; on iPad, in More; on iPhone, in the project; in Bernie Studio, also in the preferences.

This manual is also built into Bernie: press F1, or open the Help menu, to read the topic for what you are doing. A mistake, a missing answer? Tell us

Try it in Bernie, for free.

Free laser engraving and cutting software for diode, CO2, fiber and galvo lasers. Windows, Mac, Linux, iPad, iPhone and in the browser.